THE WORLD'S BEST GRAFFITI COATING PRODUCTS PROTECT NATURAL BUILDING SURFACES AGAINST GRAFFITI, GREASE, POLLUTION AND GRIME AND IS VIRTUALLY INVISIBLE.

This amazing product is a virtually invisible, sacrificial anti-graffiti coating, made from wax polymers, that acts as a building protection product. The coating flexes with the ambient temperature and is durable and U.V. stable. It can be applied to almost any exterior building surface. It will protect your property from graffiti, grime, pollution, sea and salt spray for up to 10 years.
After 30 years of experience, we reliased that this unique coating was the most versatile, durable and easily removed coating available, being far and above any other try-hard products in the building industry. We have field tested our coating for 10 years. It is non-toxic and completely biodegradable, making it a pleasure to use. If necessary, it can be easily removed.

SIMPLE TO APPLY

Coating can be brushed, rolled or low pressure sprayed onto surface - 2 coats are necessary on brick, stone or porous surfaces. Coverage rate is approx. 53 square feet per liter for this type of surface. Allow each coat to dry a minimum of 20 minutes before recoating - 1 coat is required on hard or impervious surfaces. Coverage rate is approx. 200 square feet per liter for this type of surface - Use product as supplied and shake well before use.

CLEANING GRAFFITI MARKS OFF THE PROTECTED SURFACE

- On smooth surfaces wipe away graffiti using a mild cleaner followed by a damp cloth.
Re-apply the coating to that area.
- On brick, stone or masonry surfaces wash graffiti away by using a HOT (90 degrees C or 194 degrees F) high pressure washer at low to medium pressure. Faster removal can be achieved by using our 'Bare Brick, Stone and Masonry Remover'. You will then have to re-apply the coating in that area.